AWID LR-2000 Specifications download pdf (Page 2)

Table of Contents

1 INTRODUCTION ..............................................................................................2

2 SPECIFICATIONS ............................................................................................3

PART A INSTALLATION....................................................................................5

3 PREPARING FOR INSTALLATION ............................................................5

4 TESTING READER AND TAGS BEFORE INSTALLATION......................6

5 INSTALLING THE READER ..........................................................................7

6 INSTALLING THE CREDENTIALS...............................................................9

7 TESTING THE INSTALLED SYSTEM ........................................................10

8 INSTRUCTIONS FOR LR-2000HILOMA READER SET ...........................11

PART B PLANNING...........................................................................................12

9 APPLICATIONS..............................................................................................12

10 PLANNING FACTORS...................................................................................13

PART C REFERENCE........................................................................................16

11 TROUBLE-SHOOTING..................................................................................16

12 GLOSSARY ......................................................................................................20

NOTE: READ AND USE THIS MANUAL.

FAILURE TO FOLLOW THE PLANNING AND INSTALLATION GUIDE MAY RESULT IN POOR PERFORMANCE

AND EVEN CAUSE PERMANENT DAMAGE TO THE READER. THIS WILL VOID THE PRODUCT WARRANTY.

REVISION HISTORY

Version No. Revised By Date Sections Affected Remarks

1.4 LHH 27 August 2008 All Revised version

1 INTRODUCTION

1.1 GENERAL DESCRIPTION

AWID's Sentinel-Prox LR-2000 Reader is an extra-long-range Radio Frequency Identification (RFID) reader that works with

a selection of encoded credentials that may be clipped, hung, taped, adhered, fastened or held by hand inside or outside the vehicle.

This reader comes with a unique combination of long read range, small size, and low power consumption. It has an internal power

converter, allowing it to work with a wide range of supply inputs without affecting its performance. With a 12 volt DC supply,

its current consumption is less than 1 ampere, making it suitable for a large selection of commercial power supplies. The LR-2000

reader has simultaneous Wiegand and RS-232 outputs. Its primary applications are automated parking garage entrance control,

hands-free access control, vehicle identification, asset tracking, and asset management applications.

1.2 SPECIAL FEATURES

• Single small housing for reader electronics, RF module and antenna – blends into the landscape.

• Easy to install using a pan-and-tilt adjustable mounting bracket – available from AWID.

• Compatible with all commercial access control systems.

• Can be interfaced to a PC or to a special application controller.

• Shares code formats with other encoded cards, badges and tags.

• Allows mixing RFID products for several applications into an integrated system.

• Operates at low power level.

• Uses frequency-hopping technology in the 902-928 MHz band (standard).

• Passive tags assure small size, unlimited life, and easy mounting out of the driver’s vision.

• Users do not need an FCC license.

LR-2000 Manual V1.4 Page 2 of 20

1 2 3 4 5 6 7 ... 19 20

Comments to this Manuals

No comments

AWID LR-2000 Specifications Page 2

Comments to this Manuals

Related products and manuals for Card readers AWID LR-2000